Antx, Inc. : Products : Elite Pump Controller : Wiring

PRODUCT:

Elite Pump Controller

Wiring for a Float Switch Application

DIN8, RELAY4, and a DIN8 I/O card are required. The channel assignments for float switch sensors are:

Channel Number	Operation
Chan 11, Pump 1 Auto	Normally Closed input. Puts pump in Auto mode
Chan 12, Pump 2 Auto	Normally Closed input.Puts pump in Auto mode
Chan 13, Pump 1 Hand/Off	Turns pump on or off manually.
Chan 14, Pump 2 Hand/Off	Turns pump on or off manually.
Chan 15, Pump 1 run time	Normally Open input. Signal indicating when pump 1 is actually running, the system computes run time and number of starts.
Chan 16, Pump 2 run time	Normally Open input. Signal indicating when pump 1 is actually running, the system computes run time and number of starts.
Chan 17, Pump 1 overtemp	Normally Open input. Keeps pump off when overtemp condition exists.
Chan 18, Pump 2 overtemp	Normally Open input.Keeps pump off when overtemp condition exists.
Chan 21, Pump 1 relay	Control output to turn pump on/off
Chan 22, Pump 2 relay	Control output to turn pump on/off
Chan 23, SPARE relay
Chan 24, SPARE relay
Chan 31, Low alarm float switch	Normally Open input.Initiates low level alarm call.
Chan 32, High alarm float switch	Normally Open input.Initiates high level alarm call.
Chan 33, Lead/Lag select	Selects pump 1 or 2 as the lead pump when not in alternation mode.
Chan 34, Motor 1 starter or other fault	Prevents pump 1 from running while in fault.
Chan 35, Motor 2 starter or other fault	Prevents pump 2 from running while in fault.
Chan 36, Lead float switch	Starts the lead pump.
Chan 37, Lag float switch	Starts the lag pump.
Chan 38, Off float switch	Stops both pumps.

Wiring for a Level Sensor Application

DIN8, RELAY4, DIN4 or DIN8 and an AIN8 I/O card are required. The channel assignments for the level sensor are:

Channel Number	Operation
Chan 11, Pump 1 Auto	Normally Closed input. Puts pump in Auto mode
Chan 12, Pump 2 Auto	Normally Closed input.Puts pump in Auto mode
Chan 13, Pump 1 Hand/Off	Turns pump on or off manually.
Chan 14, Pump 2 Hand/Off	Turns pump on or off manually.
Chan 15, Pump 1 run time	Normally Open input. Signal indicating when pump 1 is actually running, the system computes run time and number of starts.
Chan 16, Pump 2 run time	Normally Open input. Signal indicating when pump 1 is actually running, the system computes run time and number of starts.
Chan 17, Pump 1 overtemp	Normally Open input. Keeps pump off when overtemp condition exists.
Chan 18, Pump 2 overtemp	Normally Open input.Keeps pump off when overtemp condition exists.
Chan 21, Pump 1 relay	Control output to turn pump on/off
Chan 22, Pump 2 relay	Control output to turn pump on/off
Chan 23, SPARE relay
Chan 24, SPARE relay
Chan 31, Low alarm float switch	Float backup for level sensor for pump control and alarming.
Chan 32, High alarm float switch	Float backup for level sensor for pump control and alarming.
Chan 33, Lead/Lag select	Select pump 1 or 2 as the lead pump when not in alternate mode.
Chan 34, SPARE
Chan 35, SPARE
Chan 36, Motor 1 starter or other fault	Prevents pump 1 from running while in fault and causes alarming.
Chan 37, Motor 2 starter or other fault	Prevents pump 2 from running while in fault and causes alarming.
Chan 38, Phase Monitor Fault	Prevents pumps from running while in fault and causes alarming.
Chan 41, Level sensor analog input	Voltage or current input from level sensor
Chan 42-48, spare AIN